Kramer Electronics user manual Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

6 Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher

Figure 3: Connecting the VP-81KSi

To connect1 the VP-81KSi, as illustrated in the example in Figure 3:

1.Connect up to eight2 SI-1VGARemote Step-in Panels to the VP-81KSi

15-pin HD VIDEO INPUT connectors3 and to the 3.5mm mini jacks (from 1 to 8).

2.Connect up to eight WUXGA computer graphics sources to the SI-1VGA15-pin HD video connectors.

3.Connect up to eight unbalanced audio sources to the 3.5mm mini jack audio connectors on the SI-1VGApanels.

4.Connect the 15-pin HD VIDEO OUTPUT connector to a WUXGA acceptor (for example, a projector).

1 Be sure that the power is switched off on each device before connecting it to your VP-81KSi. After connecting all the devices to your VP-81KSi, switch on the power of the VP-81KSi, and then switch on the power of each device

2 You do not have to connect all the inputs 3 The cable used must connect all 15 pins

9