Connecting the VP-81KSi 8x1 UXGA/Audio STEP-IN Switcher
2.Using a 15-pin HD (male to male) cable1, connect the 15-pin HD connector on the rear of the SI-1VGAto the corresponding input on the rear of the VP-81KSi.
3.Using an audio cable with 3.5mm mini jacks at both ends2, connect the 3.5mm mini connector on the rear of the SI-1VGAto the corresponding audio input on the rear of the VP-81KSi.
4.Repeat steps 2 and 3 for each SI-1VGAremote step-in module.
Figure 7: Connecting the SI-1VGA
6.4Connecting the AV ON CAT 5 Twisted Pair Output
You can connect the VP-81KSito any compatible Kramer TP (Twisted Pair) receiver, for example, TP-120 (no audio) or TP-122 (with audio).
For further details, refer to the relevant TP receiver user manual3.
6.5Connecting to the VP-81KSi via the RS-232 Port
You can connect to the VP-81KSivia an RS-232 connection using, for example, a PC.
To connect to the VP-81KSi via RS-232:
•Connect the RS-232 9-pin D-sub rear panel port on the VP-81KSiunit via a 9-wire straight cable (pin 2 to pin 2, pin 3 to pin 3, pin 5 to pin 5) to the RS-232 9-pin D-sub port on your PC
1 For example, Kramer C-GM/GM
2For example, Kramer C-A35M/A35M
3Available for download from http://www.kramerelectronics.com
12 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |
