Connecting the DVD recorder

Preparing the remote control for operation

The remote control and its batteries are packed separately in the original DVD recorder packaging. You must install the batteries in the remote control before use - described in the following section.

1Take the remote control and the enclosed batteries (2 batteries).

2Open the battery compartment, insert the batteries as shown and then close the battery compartment.

The remote control is now ready to use.

Its range is approximately 5 to 10 meters.

'Aim' correctly

Aim the remote control at the DVD recorder and not at the TV set.

Using your DVD remote control

with your TV set

With the enclosed multicode remote control you can control the main functions of your TV set. To do this, you must first enter a code number that corresponds to the make of your TV set.

You will find a summary of all available remote control codes on the last page of this manual.

1Hold down the STANDBY m button.

2Using the number buttons 0..9 , enter the code number that corresponds to the make (manufacturer) of your TV set.

3When you have entered the code number check that, the TV set will responds to the TV VOLUME r or TV

VOLUME q buttons.

aMy TV set will not react

bAlso try to enter the other code numbers or that of other manufacturers.

b In some cases, it is possible that your TV set will not react to the selected code numbers. If this is the case, you unfortunately cannot use this function.

aHow can I reset the code?

bEnter the number 000.

If you remove the batteries, the selected code will be stored for about 5 minutes before resetted to 000.

4You can select one of the following functions:

TV VOLUME q increase the TV volume

TV VOLUME r decrease the TV volume

For the following functions you need to hold down the

TV button (on the left side) and then select the function you need with the appropriate button.

STANDBY m switch off the TV set CHANNEL q next programme number CHANNEL r previous programme number

Additionally on Philips TV-sets:

T/C switch Teletext (TXT) on/off TIMER s Clock display on the screen on/off RETURN To return to the previous menu step

SYSTEM MENU Call up the System Menu from the TV

B, A In the menus cursor up/down D , C In the menus cursor left/right OK Confirm functions or settings

Colour buttons Colour buttons for special functions TUNER Switchng the TV from the external sockets to

the internal tuner (TV channels).

ENGLISH

13

Page 15
Image 15
Philips HDRW 720/00-02 operating instructions Connecting the DVD recorder, Preparing the remote control for operation