44
a'Warning,this programme number hasnot been
allocated,please go to Editor to set it.' appearson the
screen
bTheprogramme number ofthe TV channel is not available in the
GUIDEPlus+®system or allocationis wrong.
Tochange or checkthe channeldata, proceed as follows:
-Press A.
Select'Editor' with C.
-Select the TVchannel using Bor A.
-Press Cto go to the right tile.
Incase youcan receivethe selectedchannel only via an external
receiver,press the red button to select the corresponding source.
-Press the greenbutton.
-Enter the programme number of the TV channel using the number
buttons.
Ifthe source you have selected is an external receiver, enter the
programmenumber that you would also enter at the externalreceiver
forthis TV channel.
4Repeatsteps 2to 3to programall yourrecordings.
5Endwith the GUIDE/TVbutton.
Tofind out how you can check which shows you have
programmed,read the sectionon 'Howto changeor delete a
programmedrecording (TIMER)'.
If one or more recordings have been programmed 'TIMER' will light up
onthe display.
Programming recordings with theShowView®System
Thanksto thisprogramming system, youno longerneed to tediously
enterthe date, programme number, start and finish times. All the
informationneeded by the DVD recorder for programming is
containedin the ShowView®programmingnumber. This 9-digit
ShowView®numberis found in most TV listings magazine.
1Switchon the TV set. If required, select the programme number
forthe DVD recorder.
2Press TIMERson the remotecontrol.
The'Schedule' screen willappear
3Pressthe red functionbutton ('ShowView').
ShowView Manual Home
Pleaseenterthe ShowView programming number
andpressOK to confirm.
=========
Grid Search Schedule Info
Noprogrammes
Once 0
4Enterthe entire ShowView number. This number is up to 9 digits
longand can be found next to the start time of the TV programme
inyour TV listings magazine.
e.g.:5-312-4 or 5,312 4
Enter53124 for the ShowView-number.
Usetherefore the number buttons 0..9 on the remote control.
If you makea mistake you can press Dor the green action button
togo back a position.
5Confirmwith OK.
Programming a recording (TIMER)