Philips HDRW 720/00-02 operating instructions Additional user preferences, Picture settings

Additional user preferences

General

This section describes how you can make additional personal settings. The symbols have the following meaning:

Picture settings

Sound settings

Language settings

Additional settings

Disc settings

Preparation:

•) The TV set is switched on, and if necessary, the programme number for the DVD recorder has been selected.

•) the DVD recorder is switched on.

1Press the DISC MENU button and then the SYSTEM MENU button on the remote control.

P The menubar appears.

If this menubar is not complete visible on your wide screen TV-set, change the picture settings on your TV.

2Select 'A' using D oder C and confirm with

3Select the corresponding function using B or A and confirm with C .

4Select the corresponding line using B or A and confirm with C . For more information on each function, read the following

pages.

5Select the corresponding function using B or A , or the setting with D or C . Select the functions you want to change as described in the following pages.

6Confirm the new setting with OK .

7Close the menu item with D .

Picture settings

You can select the following functions in this menu:

Picture

TV shape	16:9
Black level shift
	Off
Video shift
	ï
SCART video
	RGB

'TV shape'

The picture signal from your DVD recorder can be set to match your TV set:

O'4:3 letterbox'

for a widescreen picture with black bars at the top and bottom

O'4:3 panscan'

for a full-height picture with the sides trimmed.

O'16:9'

for a widescreen TV set (16:9 screen ratio)

'Black level shift'

Adapts the colour dynamics for NTSC playback when switched to 'On'

'Video shift'

Use this feature to adjust the position of the picture on your TV left or right using D , C to suit the screen of your TV set.

'SCART video'

Since RGB and S-VIDEO signals sometimes use the same connections on a scart cable, the two signals cannot be transmitted simultaneously. With these settings, you can decide whether RGB or S-VIDEO signals are to be transmitted. This setting affects only the scart sockets of the DVD recorder ( EXT1 TO TV-I/Ooutput socket and EXT2 AUX-I/Oinput socket).

Please also observe which signals are available at which scart socket of the TV set or how the scart sockets need to be switched.

If necessary, consult the instruction manual of your TV set.

O'RGB'

Depending on the TV set you are using, switching between the 'RGB' and the 'Video(CVBS/FBAS)' signal is done automatically. If the picture scrolls to the side or colour quality problems appear on some TV sets when the setting is 'RGB', you must select 'CVBS only'.

74