Philips HDRW 720/00-02 Installation of the External receiver, Language, Country, Postal code

The GUIDE Plus+® System

'Setup'

Setup Home

Press Aor Bto select. Then press OK to confirm.

Setup
Choose item to set up :
Language	English
Country	United Kingdom
Postal code	XXXXX
External receiver 1	None
External receiver 2	None
External receiver 3	None

Check the data displayed on the screen. If necessary, you can change these. To do so, select the corresponding line with B or A .

'Language'

Here you can change the language for the on-screen menu.

1Press OK .

2Select the desired language using B or A and confirm with OK .

3Press OK to return to the 'Setup' screen.

'Country'

Select the country you currently live from the list. The DVD recorder needs this information to load the right channel list.

1Press OK .

2Select the country you live in using B or A and confirm with OK .

3Press OK to return to the 'Setup' screen.

'Postal code'

In order to adjust the GUIDE Plus+® system correctly, it is necessary to know your current location with the TV channels available. Using the local post code and the country, the DVD recorder can automatically make the settings.

1Press OK .

2Choose the entry position using C , D . Select the local post code of your location using A , B , or the number buttons 0..9 .

O Depending on the country you select, you can also enter letters using B or A .

aI cannot enter a local post code

bYou have selected a country in which none of the channels transmits GUIDE Plus+® data yet.

3Confirm the local post code with OK .

4Press OK to return to the 'Setup' screen.

'External receiver 1'

OHow you install the external receiver you will read in the next chapter.

OIf you have no external receiver connected, read the section 'Finalise set-up'.

Installation of the 'External receiver 1'

Setup Home

Press Aor Bto select. Then press OK to confirm.

Setup
Choose item to set up :
Language	English
Country	United Kingdom
Postal code	XXXXX
External receiver 1	None
External receiver 2	None
External receiver 3	None

If you have connected an external receiver (satellite receiver, set-top box, cable TV box), you must also install it in the GUIDE Plus+® system. TV programmes (TV channels) that you can only watch via the receiver can also be displayed in the GUIDE Plus+® system and be programmed for recording.

You can connect up to three external receivers to the DVD-Recorder.

1Select with B or A in the 'Setup'screen the line 'External receiver 1' and confirm with OK .

2Read the information on the screen and confirm with OK .

3Select the type of the external receiver. This setting serves to preselect the type used.

Which types can I choose?

This selection depends on the country and the GUIDE Plus+® system provider. Therefore, some types may have no function.

'Cable': Cable receiver, cable box.

'Satellite': Analogue or digital satellite receiver.

'Terrestrial': Digital terrestrial decoder box.

'None': No external device connected.

4Confirm with OK .

If you selected 'None', there is nothing further you need to do here. Read on in the section entitled 'Continue set-up'. Otherwise, you should continue here.

5Select your provider from the list.

O If you do not have a provider, select 'No provider'

6Confirm with OK .

7Select the brand of your external receiver from the list. If, additionally your provider is printed on your receiver (e.g. Sky,...), you must choose the provider as brand.

O Depending on the type and provider you selected, a limited selection will appear.

30