Introduction

Super Video CD

CD-R (CD-Recordable) with Audio/MP3 content

CD-RW (CD-Rewritable) with Audio/MP3 content

Regional code

DVDs must be marked 'ALL' for all regions or '2' for region 2 to work in this device. Regional code 2 includes: Europe, Japan, South Africa, Middle East (incl. Egypt).

Technical data

You will find more technical data on the last cover page.

Voltage: 220-240V/50Hz

Power consumption: 38W

Power consumption (standby): less than 3W (clock display off)

Power outage/no power: Channel and timer information remain saved for approx. 1 year, the time is saved for approx. 12 hours.

If there is power outage during a recording on the HDD (time shift buffer) at most the last 5 minutes before the power outage will be lost.

Operating position: maximum 10 degree inclination in all directions

Ambient temperature: 15 °C - 35 °C

Humidity: 25% - 75%

Accessories

Operating instructions

Guarantee booklet

Remote control and batteries

Aerial cable

Mains cable

Scart cable (AV-Euro cable)

G-LINK transmitter

Important

ACaution! Visible and invisible laser radiation. If the cover is open, do not look at the beam.

Because of the risk of eye injuries, only qualified service engineers should open the device and carry out maintenance or repair work.

ALASER

Typ: Semiconductor lasers InGaAlP (DVD), AlGaAs(CD)

Wavelength: 660nm (DVD), 780nm (CD)

Output power (outside the lens): 20mW (DVD+RW write), 0.8mW (DVD read), 0.3mW (CD read).

Beam divergence: 82 degrees (DVD), 54 degrees (CD)

ADanger. High voltage! Do not open.

Do not insert objects into the ventilation slots and fan openings!

You run the risk of getting an electric shock.

AThe device does not contain any user-serviceable parts. Please leave all maintenance work to qualified personnel.

AThere are some components in the DVD recorder that keep running as long as the recorder is connected to the power supply. To switch off the DVD recorder completely, you must unplug it from the power supply.

AIf you disconnect the DVD recorder from the mains, make sure to take the plug out of the wall socket and not just remove the connector from the 4MAINS socket at the back of the unit. Children playing near the device could suffer injuries at the free end of the cable.

AMake sure that air can circulate freely through the ventilation slots on the side and the fan opening at the back of the device to avoid overheating. The device should be placed on a firm surface.

ADo not insert any objects into the openings or ventilation slots of the device.

CThese operating instructions have been printed on non-polluting paper.

CPlease dispose of old batteries safely.

CPlease take the packaging to your local recycling centre.

CThis electronic equipment contains several materials that can be recycled. If you are disposing of an old device, please take it to a recycling centre.

BDo not switch on the device immediately after transport from a cold to a warm room or vice versa, or under conditions of extreme humidity.

Wait at least three hours after transporting the device. The DVD

8

Page 10
Image 10
Philips HDRW 720/00-02 operating instructions Regional code, Technical data, Accessories, Alaser