Philips HDRW 720/00-02 Sound settings, Digital output, Analogue output, Night mode

Additional user preferences

O'S-Video'

Only the S-Video signal will be processed at both scart sockets ( EXT1 TO TV-I/Ooutput socket and EXT2 AUX-I/Oinput socket).

In case the scart socket of the TV set is not suitable for S-VIDEO (Y/C) signals, you will only see a black&white picture, although the recording will be made in colour.

Moreover, only the video (CVBS, FBAS) signal will be used for recordings via the EXT1 TO TV-I/Oscart socket.

Please observe that when making recordings from a video recorder that transmits only video (CVBS/FBAS) signals through the scart cable, recordings via scart socket EXT2 AUX-I/Omay be made in black and white.

Therefore, use this setting with caution.

O'CVBS only'

Only the video (CVBS/FBAS) signal is transmitted, regardless of the video signals (RGB, Y/C) at the scart sockets. This setting is selected automatically when no 'RGB' or 'S-VIDEO' signal is detected at the scart socket.

When selecting the settings 'S-Video' or 'CVBS only', the RGB signal is switched off.

The 'RGB' signal is switched off.

O'S-video + YPbPr'

Component Video (YUV) and S-Video(Y/C).

GUIDE Plus+® menus only available on YUV ouput sockets.

O'CVBS + YPbPr'

Component Video (YUV) and Video (FBAS/CVBS). GUIDE Plus+® menus only available on YUV ouput sockets.

With all other settings, the signal is switched off at the COMPONENT VIDEO OUT sockets. This will also be displayed as information on the screen.

Sound settings

You can select the settings in this menu depending on which audio outputs are used.

If you only use the analogue audio output (red and white socket AUDIO OUT L/R ), select the setting 'Off' in the 'Digital output' menu.

Digital output	All	Sound	ENGLISH
Analogue output
	Stereo
Night mode
	Off

'Digital output'

You can select one of the following settings for devices that are connected to the COAX OUT or OPTICAL OUT sockets:

O'All'

Dolby Digital and DTS signals are fed unaltered to the digital output. MPEG-2 multi-channel signals are converted to PCM (Pulse Code Modulation).

For receivers/amplifiers with digital multi decoders.

O'PCM only'

Digital and MPEG-2 multi-channel signals are converted to

PCM (Pulse Code Modulation). For receivers/amplifiers

without digital multi decoders .

O'Off'

Digital output switched off.

For devices with analogue audio input.

'Analogue output'

You can select one of the following settings for devices that are connected to the analogue audio output ():

O'Stereo'

For devices without DolbySurround or TruSurround. Use this setting if the DVD recorder is only connected to a stereo TV set.

O'Surround'

Dolby Digital and MPEG-2 multi-channel are mixed down to a Dolby Surround-compatible two-channel output signal.

For devices with Dolby Surround / Pro Logic Decoder .

'Night mode'

Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours. This only works with Dolby Digital audio on DVD video discs.

75