Philips HDRW 720/00-02 Automatic TV channel search, Will appear in the display

Additional installation features

a'￿￿￿￿' will appear in the display.

The DVD recorder is not receiving a video signal from the TV set.

bChech the connectors at both ends of the scart cable.

b Check your TV's operating instructions to see which scart socket is used for video signals.

b If the problem persists, you won't be able to use this feature. Please read 'Sorting and deleting TV channels manually'.

0Wait until for example '￿￿ ￿￿' appears in the display.

￿￿ ￿￿

ASelect the next programme number on the TV set, e.g. '2'.

BConfirm with OK on the DVD recorder remote control.

O If you confirmed the wrong TV channel, you can delete the last allocation with D .

CRepeat steps 0to Buntil you have assigned all the TV channels from your TV set.

ÀTo end, press SYSTEM MENU .

a'Switch off recorder, new preset' appears on the screen

bIn order to transfer the new TV channel order to the GUIDE Plus+® system, it is necessary to switch off the DVD recorder ( STANDBY m ). Wait for approx. 4 minutes before you switch the DVD recorder on again.

b If this message appears after you switch on the DVD recorder, it was not possible to complete the transfer process. Switch off the DVD recorder using STANDBY m .

Automatic TV channel search

If the channel assignments of your cable or satellite TV provider change or if you are reinstalling the DVD recorder, e.g. after moving house, you can start this procedure again. This will replace the stored TV channels with the new ones.

Preparation:

•) The TV set is switched on, and if necessary, the programme number for the DVD recorder has been selected.

•) the DVD recorder is switched on.

1Press the BROWSER HDD button and then the SYSTEM MENU button on the remote control.

P The 'SYSTEM MENU' appears.

2Select 'Set up' using B .

3Press C to select 'System'.

4Select the line 'Installation' using B and confirm with C .

P A message appears on the screen that this setting will flush the 'Time Shift Buffer'.

O If the 'Time Shift Buffer ' contains important recordings, save them with the REC/OTR n button first. Read additional information to the 'Time Shift Buffer' in the chapter 'The Time Shift Buffer'.

5Select 'Yes' with D and confirm with OK .

O If the message window was closed, confirm the line with C again.

6Select 'Autom. search' using B or A .

7Press C .

P The automatic TV channel search starts. This allows the DVD recorder to save all available TV channels. This procedure may take several minutes.

ENGLISH

Installation

Autom. search

Searching for TV channels

00 Channels found

Please wait

PWhen all the TV channels have been found, 'Autom. search complete' will appear on the TV screen.

8To end, press SYSTEM MENU .

You can read about how to search for a TV channel manually in 'Manual TV channel search'.

25