Information on the screen of your TV

The symbols on your DVD recorder display

These symbols can light up on your DVD recorder display:

Multi-function display/text line •) Clock

•) Disc/title playing time •) Title name

•) Display of the programme number of the TV channel/playing time/channel name/function.

•) Display of information and alerts

•) Display of the title from the actual recording.

IIIIIIIIIIIIIIIPosition/Diskbar: Displays the current position on the HDD/disc.

Time Shift Buffer Displays the elapsed time. If all segments lits, the oldest recording will be deleted from the Time Shift Buffer. Play/Record: No segment will lit at the current position.

Pause: Flashing segment at the current position.

Stop: Nothing appears.

SAT An automatic recording from a satellite receiver (SAT recording) has been programmed.

TIMER A recording (timer) has been programmed

o((( A remote control signal has been received

VPS/PDC Video programming system / programme delivery control: A VPS or PDC code is transmitted for the selected TV program

LANG II During playback a 2-channel tone was detected or a 2-channel tone was received. 'I' or 'II' lights up depending on which sound channel has been selected

Messages in the DVD recorder display

￿￿￿￿￿￿￿

The following messages may appear in your DVD recorder display

￿￿￿￿ ￿￿￿ The DVD recorder is in initial installation mode. Switch the TV on, then read the paragraph on 'Initial installation' in 'Installing your DVD recorder'.

￿￿￿￿￿￿￿￿ No input signal available (signal inadequate or unstable)

￿￿￿￿The menu on the screen is active

￿￿￿￿￿￿￿ Disc tray opening

￿￿￿￿￿￿￿￿ Disc tray open

￿￿￿￿￿￿￿ Disc tray closing

￿￿￿￿￿￿￿ Disc being read

￿￿￿￿￿￿￿￿ Once recording has been successfully completed the table of contents is created.

￿￿￿￿￿￿￿￿ The menu structure is created after the first recording has been made on a new disc

￿￿￿￿￿￿￿￿ You received a copy-protected signal. This may come from a copy-protected DVD/videotape of a DVD/video player or from a TV channel.

During the display ￿￿￿￿ ￿￿￿￿no recording will be made. A running recording will be interrupted.

￿￿￿￿Please wait until this message disappears. The DVD recorder is busy performing a task.

￿￿￿￿￿￿ A disc has not been inserted for recording. If a disc has been inserted, it cannot be read.

￿￿￿￿Information about the inserted DVD is displayed on the screen

￿￿￿￿The DVD recorder is processing the changes to make the disc DVD compatible

￿￿￿￿￿￿￿ The entire DVD+RW is being erased

￿￿￿￿￿￿￿￿￿ The DVD+RW/+R inserted is either new or has been completely erased (no recordings).

￿￿￿￿￿￿￿￿￿ The DVD+RW/+R inserted is protected against recording. How to remove this protection you will read in the section 'Protect disc against accidental recordings' in the chapter 'Recording on a DVD+RW/+R' .

￿￿￿￿￿￿￿￿ The maximum number of titles per disc/HDD has been reached. The maximum number of titles on a disc is 48 and on the HDD 499.

￿￿￿￿￿￿￿ The maximum number of chapters within a title/or the disc has been reached. The maximum number of chapters is; DVD+RW/+R: within a title 99, on the disc 255 (spreaded over the whole disc)

82

Page 84
Image 84
Philips HDRW 720/00-02 operating instructions Symbols on your DVD recorder display, Messages in the DVD recorder display