ENGLISH
17
PREPARATIONS
En

Installing batteries

Detach the battery cover on the rear of the remote control,
and insert two R6 (size AA) batteries with 0 and 9 aligned
correctly .

When to replace the batteries

The maximum operational distance between the remote
control and the sensor of the units should be approximately
7 meters. If this distance decreases, replace the batteries
with new ones.
NOTES
•When operating with the remote control, point the top of
the remote control toward the player .
If the unit is not going to be used for an extended period of
time, remove the batteries to prevent possible electrolyte
leakage.
The remote control may not operate correctly when:
-The line of sight between the remote control and the
unit is exposed to intense light, such as direct sunlight.
-There is fluorescent lighting near the remote sensor in
the display window .
-Other remote controls are used nearby (those of a TV
set, etc.).
REMOTE CONTROL
Although this unit can play DVDs, super video CDs, V ideo
CDs, Audio CDs or MP3 discs, some of the functions are
restricted by the kinds of discs.
In this operating instructions, the following symbols are used
to make distinction.
: Shows the function or the display for only
DVDs.
: Shows the function or the display for only super
video CDs.
:Shows the function or the display for only video
CDs.
: Shows the function or the display for only
audio CDs.
:Shows the function or the display for only MP3
discs.
No symbols: The function works in common.

About the symbol display

The symbol will be displayed on TV screen if you
press a button which cannot be used or enter an incorrect
number.
Some discs may have places where they do not allow
pressing of the STOP, SKIP, or other buttons. The
mark will be displayed on the screen if you press a button
that is not allowed in such a place.
ABOUT SYMBOLS