12
ENGLISH
CONNECTIONS (CONTINUED)
B Connecting to a TV set and an amplifier with a Digital In jack
Use either the commercially available optical cord or 75 ohm coaxial cord when connecting this unit to an amplifier with a
Digital In jack. The supplied video cord is also available instead of the coaxial cord.
Set the setup menu correctly after connecting!
According to the audio equipment and TV set to which
this unit is connected, set the “AUD OUT” and “TV TYPE”
of the setup menu correctly referring to the following below .
See “CHANGING SETUP VALUE” on page 32 in detail.
AUD OUT
[DIGITAL PCM]
to a digital input jack
TV set
Front
speaker (L)
Front
speaker (R)
Rear of the unit
Amplifier with a Digital In jack
to an AC outlet
Optical cord (not supplied)
When your TV set is equipped with an S-video input terminal, see page 16.
to a video input
jack (yellow)
to VIDEO OUT 1 or 2
jack (yellow)
to DIGITAL AUDIO
OUT OPTICAL jack
to DIGITAL
AUDIO OUT
COAXIAL jack
Coaxial cord
(not supplied)
yellow
yellow
TV TYPE
When your TV set is a conventional-screen size TV:
[4:3 LB ]
When your TV set is a wide-screen size TV:
[16:9 ]
NOTE
When the picture noise appears while copy-protected DVDs
are played, connect the unit directly to a TV set. Do not
connect through a VCR, TV/VCR or AV selector.
VIDEO
OUT
AUDIO OUT
OPTICAL
COAXIAL
DIGITAL
AUDIO OUT
LR
S-VIDEO
yellow
Video cord
(supplied)