CONNECTIONS

Before connection, identify the type of your audio equipment or of the TV set referring to the following chart. Then decide the connection and the setup menu according to the types.

NOTES

• The player cannot be connected to a TV set which is not equipped with a video input connector

.

• Use a commercially available stereo-monaural audio cord when connecting to a monaural TV set.

 

 

 

 

 

Audio system to be connected

Input jack of equipment to be

 

Referring

 

connected to the DVD player

 

Letter

None (only the television is connected)

 

 

 

 

See A.

 

 

 

 

A stereo system or an amplifier

Digital input jack

 

See B.

 

Analog audio input jacks (L/R)

 

See C.

 

 

 

 

An AV receiver equipped with Dolby Digital

Digital input jack

 

See D.

decoder or DTS decoder

 

 

 

 

 

 

 

 

 

An AV receiver equipped with Dolby Pro Logic

Analog audio input jacks (L/R)

 

See E.

Surround

 

 

 

 

 

 

 

 

 

 

 

Before making connections

Connect the AC cords of the unit and external equipment at the end, after finishing the other connections.

Insert the plugs completely into the jacks. Loose connections may produce a humming sound or other noise interference.

When using an optical connection, remove the dust cap from the DIGIT AL AUDIO OUT OPTICAL jack on the rear of this unit. Keep the cap in store. When not using optical connections, the dust cap should be in place.

Refer to the instructions for the connected equipment.

For customers living in Burma, Cambodia, Philippines, Taiwan or Republic of Korea

In the above countries, TV broadcasting system is NTSC. To use this unit with the NTSC TV set, TV SYS in the setup menu of this unit must be changed to NTSC, after connecting. For more details, refer to "Basic operations" on page 32

and "TV SYS" on page 34.

CAUTION

Do not select “ BITSTREAM” in the “AUD OUT” when connecting to an AV receiver not equipped with a Dolby Digital decoder or DTS decoder (with an optical or coaxial connecting cord).

Merely attempting to play a DVD may cause a high level of noise which could be harmful to your ears and damage the speakers. In such a case, be sure to select “DIGITAL PCM” in the “AUD OUT”.

NOTES

When the picture noise appears while copy-protected DVDs are played, connect the unit directly to a TV set. Do not

connect through a VCR, TV/VCR or AV selector .

• For the speakers and their connection, refer to the instructions for the AV receiver .

CAUTION

Do not place heavy objects on this unit, otherwise disc tray of this unit may not be opened.

10 ENGLISH

Page 10
Image 10
Aiwa XD-DV270 operating instructions Connections