User preferences for the HDD

'Direct rec.'

If a recording starts while the DVD recorder is switched off, the TV channel currently selected on the TV set will be compared with the TV channels stored in the DVD recorder.

-If the TV channel is found, recording will start.

-If the TV channel is not found, a message will appear on the screen and in the display.

O'On':

Direct Record is activated.

O'Off':

Direct Record is deactivated.

'Filter'

Here you can choose between:

I can not select this function

Check the actual record mode selected. This function is available in the record modes 'M4' to 'M8' only.

O'Sport':

Picture quality is optimised for rapid movements in the recording modes (picture qualities) M4 to M8.

Please observe that this setting will reduce the overall impression of the picture quality.

O'Normal':

Better overall picture quality.

Please observe that this setting may cause picture artefacts (MPEG artefacts) to appear in rapid movements.

'Safety Slot'

Here you can enter a time (one to five minutes) when a programmed recording (Timer) should start earlier and end later. This could be necessary if the information from the GUIDE Plus+® system about the start and stop time always differ from the actual start and stop time.

'Set up'

SYSTEMMENU

System

Set up

Auto delete

Jump forward

Jump back

Installation

Flush Buffer

'System'

In this menu, you can select one of the following features:

'Auto delete'

If there is no space for new recordings on the HDD, you can determine here whether recordings will be automatically deleted or not. You can see the titles and the sequence according to which they will be deleted in the 'Delete Order' setting in the media browser. For more information, read the chapter 'The Media Browser'.

O'On':

Recordings will be automatically deleted in the following order:

1)Titles that have already been viewed. Symbol 'E'.

2)Titles that were not protected. No symbol 'F' available.

O'Off':

No recordings will be automatically deleted.

'Jump forward'

Set the time you want to jump forward when you press JUMP FWD in the time shift buffer.

'Jump back'

Set the time you want to jump backward when you press JUMP BACK in the time shift buffer.

Use the setting 5 minutes for Jump forwardand 1 minute for 'Jump back', to make it easy to skip unwanted scenes.

72

Page 74
Image 74
Philips HDRW 720/00-02 operating instructions Direct rec, Filter, Safety Slot, Jump forward, Jump back