| Contents |
|
Contents |
| |
1 | Introduction | 1 |
2 | Getting Started | 1 |
2.1 | Quick Start | 1 |
3 | Overview | 3 |
3.1 | Defining EDID | 4 |
4 | Defining the | 5 |
4.1 | Using the IR Transmitter for the | 7 |
5 | Installing in a Rack | 8 |
6 | Connecting the | 9 |
6.1 | Connecting the Balanced/Unbalanced Stereo Audio Output | 10 |
6.2 | Connecting Remote Contact Closure Input Selection Switches | 11 |
6.3 | Connecting the | 11 |
6.4 | Connecting the AV ON CAT 5 Twisted Pair Output | 12 |
6.5 | Connecting to the | 12 |
6.6 | Connecting to the | 13 |
6.6.1 | Setting the | 13 |
6.6.2 | Connecting and Controlling Multiple | 14 |
6.7 | Cascading Multiple | 14 |
6.8 | Controlling a Remote | 15 |
6.9 | Connecting to the | 16 |
6.9.1 | Connecting Directly to the Ethernet Port | 16 |
6.9.2 | Connecting via a Network Hub, Switch, or Router | 18 |
6.9.3 | Configuring the Ethernet Port on the | 18 |
7 | Operating the | 19 |
7.1 | Using the Front Panel INPUT SELECTOR Buttons | 19 |
7.2 | Using the | 20 |
7.2.1 | Operating in Breakaway Mode | 20 |
7.2.2 | Switching to Audio Follow Video Mode | 20 |
7.3 | Setting the Audio Output Gain | 20 |
7.4 | Operating Cascaded | 20 |
8 | Operating the | 21 |
9 | Operating the | 21 |
9.1 | To Log On to the | 22 |
9.2 | The Switching Matrix Page | 23 |
9.2.1 | Switching an Input to an Output | 24 |
9.2.2 | Operating in the Confirm Mode | 25 |
9.3 | The Audio Gain Page | 26 |
9.4 | The Configurations Page | 27 |
10 | Upgrading the Firmware | 28 |
i