Operating the
Table 5: Button Illumination Descriptions
Button Color | Selected | Input Signal |
Red | Yes | No |
Green | No | Yes |
Violet | Yes | Yes |
Button does not light | No | Yes or no |
To switch an input to the outputs, press one of the eight front panel INPUT SELECTOR buttons. The INPUT SELECTOR button lights (see Table 5) and switches the input simultaneously to both the VGA and AV ON CAT 5 TP outputs.
7.2Using the Audio-Follow-Video/Breakaway Modes
By default, the
7.2.1Operating in Breakaway Mode
To operate in breakaway mode in which video and audio channels switch independently:
•Press either the VIDEO button or the AUDIO button.
If the VIDEO button lights, the switching relates just to video (and the audio remains unchanged)
If the AUDIO button lights, the switching relates only to audio (and the video remains unchanged)
7.2.2Switching to Audio Follow Video Mode
To switch to AFV (Audio Follow Video) mode:
•Press the VIDEO and the AUDIO buttons simultaneously
7.3Setting the Audio Output Gain
You can set the audio output gain using the AUDIO GAIN + and - buttons.
To set the audio output gain:
1.Press an input button. The input button lights.
2.Press either the AUDIO GAIN + (to increase) or AUDIO GAIN – (to decrease) button to vary the gain.
7.4Operating Cascaded VP-81KSi Devices
Selecting an input on a device selects the required input and automatically selects the interconnected input on the subsequent device.
Given the example illustrated in Figure 9, pressing Input 4 on device 2, selects Input 4 on device 2 and automatically selects Input 1 on the Master device.
20 | KRAMER: SIMPLE CREATIVE TECHNOLOGY |