Operating the
Ethernet, if you are connected via an Ethernet cable. Enter the IP address1 or the machine name
The default IP address is 192.168.1.39 and the default name for the unit is KRAMER_XXXX2
Serial, if you are connected via a serial port. Select the COM port from the Select Port
4.Click OK.
The Device Properties window appears.
Figure 13: Device Properties Window
5.Make the required changes.
6.Click Set to save changes, or click Close to exit and not save the changes.
7 Operating the VP-81KSi Locally via the Front Panel Buttons
Powering up the
7.1Using the Front Panel INPUT SELECTOR Buttons
Table 5 describes the input selector button illumination descriptions.
1 The default IP address is 192.168.1.39
2 The four digits are the last four digits of the machine’s serial number.
19