10 en Installing the Recessed Camera Mount | Flush Mount Ceiling Kit |
|
|
18.Attach one end of the safety tether to the hook on the Mounting Plate and the other end to the hook on the Camera Module/Base.
Figure 2.7 Attach safety tether
7Safety tether
8Camera Module/Base
19.Reattach the Camera Module/Base to the Mounting Plate.
20.Push against the underside of the FlexiDome to push the unit and the bracket up into the ceiling.
21.Adjust the focus of the camera to your desired view. Refer to the FlexiDome IP Operation Manual for focusing instructions.
22.Attach the FlexiDome inner liner to the Camera Module/ Base. Then, place the FlexiDome Trim Ring and Dome over the Camera Module and tighten the three
F.01U.126.944 1.0 2009.04 | Mounting Guide | Bosch Security Systems, Inc. |
