Heath Zenith SH-5511 manual Operation, Requirements, Features

Compact 150 Watt Motion Sensing Halogen

Model SH-5511

Requirements

•The light control requires 120-volts AC. Do not con- nect through a dimmer or other electronic switch.

•If you want to use Manual Mode, the control must be wired through a switch.

•Some codes require installation by a qualified electrician.

•This product is intended for use with a junction box marked for use in wet locations.

•The backplate has knockouts so the sensor can be mounted on most junction boxes.

•In some applications a universal adaptor plate may be needed. Adaptors are available at home centers and electrical supply stores.

Features

•Turns on lighting when motion is detected.

•Automatically turns lighting off.

•Photocell keeps the lighting off during daylight hours.

This package includes:

		6 Mounting
		Screws (3 sizes)
Cover
Plate
Sensor		3 Wire
	Gasket	Connectors

Light Control

OPERATION

Mode:	On-Time:	Works: Day	Night
Test	5 Sec	x	x
Normal	1, 5, 10 min.		x
Manual	Until Dawn*		x
	* resets to Auto Mode at dawn.

Note: When first turned on wait about 1 1/2 minutes for the circuitry to calibrate.

TEST

Put the ON-TIME switch on the	ON-TIME
bottom of the sensor in the TEST
position.
	10 5 1 TEST
AUTO
Put the ON-TIME switch in the 1, 5,	ON-TIME
or 10 minute position.
	10 5 1 TEST

Mounting Bolt Mounting Strap Rubber Plug

MANUAL MODE

Plastic Hanger	Halogen
	Bulb

Manual mode only works at night because daylight returns the sensor to AUTO.

Flip the light switch off for one second then back on to toggle between AUTO and MANUAL MODE.

Manual mode works only with the ON-TIME switch in the 1, 5, or 10 position.

1 Second OFF

then...

... back on.

© 2008 HeathCo LLC 598-1159-06