Cub Cadet M48 service manual Return to Neutral Cylinder Right

Page 7

3.12.If adjustment is necessary, remove the cutting deck.

3.13.Inspect the return to neutral cylinders, rods, and bellcranks of the hydro control linkages.

The bellcranks should pivot easily without too much play.

The rods should not be bent, and the rod ends should not be loose.

NOTE: The rod end and jam nut at the rear of each connector rod have left hand threads. A lock washer is placed between the control input arm on the hydro pump and the rod end.

NOTE: The rod end and jam nut at the front of each connector rod have right hand threads. A spacer fits between each control hub assembly (bellcrank) and the front rod end that connects to it.

The return to neutral cylinders should both work as advertised. See Figure 3.13.

RETURN TO NEUTRAL

CYLINDER (RIGHT)

Figure 3.13

NOTE: Remove the control console to gain access to the return to neutral cylinder.

M48 Tank

3.14.Loosen the jam nuts at each end of the hydro control link rods, and rotate the rods to lengthen or shorten them. See Figure 3.14.

Figure 3.14

3.15.Start the engine and release parking brake to test, then turn the engine off to make the adjust- ment.

3.16.Tighten the jam nuts against the rod ends when adjustment is complete, and make a final test to confirm.

3.17.After neutral control is correctly adjusted, set the travel stops to achieve correct tracking and adjust the lap bars for operator comfort.

See Figure 3.17.

LAP BAR

MOUNTING

HANDLE

CLAMP

BOLTS

JAM

NUT

LAP BAR TRAVEL

STOP BOLT

Figure 3.17

NOTE: The clamp bolts for the lap bar mounting handle can be used to adjust the amount of force required to move the lap bars into or out of the neutral slot.

3

Image 7
Contents Cub Cadet M48 Tank Page Table of Contents Page First Hole Second Hole Fluid Level Drive System AdjustmentOIL Filter Battery About this SectionBrake Link Brake Actuator ARM Brake Connecting RODRear Brake ARM Assembly Bellcrank Mounting Shaft Open Hydro Pump Hydro Relief ValveReturn to Neutral Cylinder Right Elbow Testing Hydro Pump OutputJAM NUT Stop Bolt Replacing the Hydro Pump NUT ROD END Bolt Lock Washer Control ARM FAN NUT WasherSpring Tensioner Pulley ARM Puller PulleyElbow Return Line Feed Line CloseHydro Pressure Lines Pump Between Pump Motor Adaptors Mounting Bolt Pulley with KEY NEW Pump Replacing the Hydro Motor Motor Plate Disconnectmounting BoltsOrientation Marks Arrow to Fittings Brake Drum Assembly Brake Linkage Adjustment Brake Link ROD Rear Brake Rear Brake ARM Assembly Bushing Brake Connector RODShoulder Nuts Brake Rear Bellcrank Link Shaft RODAdjust Here Brake SwitchFront M72 Tank M48 Tank M48 Tank Other Tank Features M48 Tank M48 Tank M48 Tank Kohler EFI Electronic Control Module Fuel pump Fuel filter is easily accessible. See Figure EFI Controls Electrical connection for injector Fuel injectorM48 Tank M48 Tank M48 Tank
Related manuals
Manual 4 pages 33.25 Kb Manual 4 pages 10.4 Kb

M48 specifications

Cub Cadet has long been a name synonymous with quality and reliability in outdoor power equipment. Among its impressive lineup are the M48, M72, M54, 48, and 60 models, each designed to provide efficient and effective lawn maintenance solutions for both residential and commercial users. These zero-turn mowers embody advanced technology and engineering excellence that cater to the diverse needs of landscapers and homeowners alike.

The M48 model is compact yet powerful, featuring a 48-inch cutting deck that allows for agile maneuvering in tight spaces. It is powered by a robust engine designed for durability and longevity, ensuring that users can tackle their mowing tasks with ease. The M72, on the other hand, elevates performance with a 72-inch cutting deck, making it ideal for larger properties and commercial applications. Both models are equipped with a hydrostatic transmission, delivering smooth acceleration and precise control while reducing the fatigue often associated with extended mowing sessions.

Cub Cadet's 48 and 60 models focus on providing versatility and performance. The 48-inch deck allows for a perfect balance between speed and accuracy, making it suitable for various terrains. Meanwhile, the M60 model enhances productivity with its 60-inch cutting deck, optimized for efficiency without compromising on quality. These mowers are engineered with cutting-edge technology, including Cub Cadet's signature SmartJet technology, which ensures superior grass cutting and a cleaner, healthier lawn.

All models in this series are equipped with a comfortable operator platform, ensuring ease of operation over long periods. Ergonomically designed seats provide excellent support and minimize user fatigue, contributing to a more enjoyable mowing experience. In addition, the user-friendly control panel and intuitive steering levers allow for quick adjustments and enhanced maneuverability.

Durability is a hallmark of Cub Cadet mowers. Constructed with heavy-duty materials, these machines are engineered to withstand the rigors of regular use while providing outstanding performance. Moreover, select models come with advanced features such as LED headlights for improved visibility during early morning or late evening mowing sessions.

Additionally, the models benefit from a robust warranty program, reflecting Cub Cadet's commitment to customer satisfaction and product reliability. Whether you're a weekend warrior caring for your lawn or a professional landscaper managing extensive properties, Cub Cadet's M48, M72, M54, 48, and 60 mowers deliver the power, performance, and comfort that users expect from a leading brand in outdoor equipment. With these innovative machines, maintaining a pristine lawn has never been easier or more efficient.