Lightolier WES Series 2X2 dimensions Options & Accessories, Specifications

SECTION 6/Folio N30-11

	CLEANGUARD WET LOCATION WES SERIES 2X2
Page 2 of 2	2' x 2' RECESSED FLUORESCENT, FOR WET LOCATIONS, COVERED CEILING USE
	2 LAMP, T8 OR T12

PHOTOMETRY

MODEL NO. WES2GFSVA26U				LER = FL - 58.6			IW - 56.3		BF - 0.87
				Comparative yearly lighting energy cost per 1000 lumens = $4.00
		coefficients of utilization — zonal cavity method								(effective floor cavity reflectance 0.20)
			RF		20					20				20
			RC		80					50				30
			RW	70	50		30		50	30	10		50	30	10
			1	79	75		73		71	69	67		68	66	65
		ratio	2	72	67		62		63	59	56		61	58	55
			3	66	59		54		56	52	48		54	51	47
		cavity	4	61	53		47		50	46	42		49	45	41
			5	56	48		42		45	40	37		44	40	36
		room	6	52	43		37		41	36	32		40	36	32
			7	49	39		33		38	33	29		37	32	29
			8	45	36		30		35	30	26		34	29	26
			9	42	33		28		32	27	24		31	27	23
			10	40	31		25		30	25	21		29	25	21
		visual comfort probability				(rated lumens per lamp 3150.)
			room size				ceiling height						ceiling height
		W		L		8.5	10.0	13.0	16.0			8.5	10.0	13.0	16.0
	20			20		56	60	66	73			53	57	63	70
	20			30		50	53	57	63			46	50	54	60
	20			40		47	49	53	57			42	45	49	53
		20		60		43	46	49	52			38	41	44	48
	30			20		58	61	66	72			56	60	63	69
	30			30		51	54	57	62			48	51	54	59
	30			40		47	49	52	55			43	46	49	52
	30			60		43	46	47	50			38	41	43	47
		30		80	lengthwise	42	44	45	48		crosswise	36	39	40	44
	40			40		48	50	52	55			44	47	50	53
	40			20		59	63	67	71			58	62	65	70
	40			30		52	55	58	62			50	53	56	60
	40			60	luminaries	44	46	48	50		luminaries	39	42	44	47
	40			80		42	44	44	47			37	39	40	43
		40		100		42	43	43	45			36	38	38	41
	60			30		53	56	59	63			51	55	57	61
	60			40		48	51	53	56			46	49	51	54
	60			60		44	47	48	50			40	43	44	48
	60			80		42	44	44	47			38	40	40	43
		60		100		42	43	42	45			37	38	38	41
	100			40		51	53	55	58			49	52	54	57
	100			60		47	49	49	52			44	46	47	50
	100			80		44	46	46	48			41	42	43	46
		100		100		43	44	43	46			39	40	40	41

ORDERING INFORMATION

Explanation of Catalog Number. Example: WES2GFSVA26U120SOGLR

WE

CLEANGUARD

WET

LOCATION

S

STATIC

2

FIXTURE					LENS FRAME:			LAMP QUANTITY:
WIDTH				FS= Flat steel frame				2=2 Lamp
				RA=Regressed				3=3 Lamp
					aluminum frame			(Not with 6" spacing)
				FA=Flat aluminum frame				4=4 Lamp
								(T8, 2' Lamp Only)
										LAMP/
									FIXTURE LENGTH:
			CEILING	TYPE:		LENS/SHIELDING TYPE:			6U=6"U Lamp T8 or T12
	G= Grid (lay-in T bar)						VA (virgin acrylic)		2U=T8, 1-5/8" U Lamp
	F=Flanged (overlap) Z spline					standard (see options and			FT=Twin Tube T5
		and plaster frame					consult factory)		17=T8, 2' Lamp
									(Nominal 24")

VOLTAGE:					OPTIONS:
				Add appropriate suffix to
120 or 277
				catalog no., ie: (GLR)
		BALLAST TYPE:
1-2 Lamp Mag. T12			LE		<10THD
			<20THD
1 & 2 Lamp Elec. T8			SO*		HI*
1-2	Lamp Elec. T8		SO*		HI*
1-2	Lamp Elec. TT5		SB*		IB*
	(40 Watt)		X3*		I3*
1-3	Lamp Elec. TT5
1-4	Lamp Elec. T8		O4*		H4*
LOL Dimming (T8)			PS		–
LOL Dimming (TT5)			PB		–

Other dimming options. Consult factory.

*Instant Start Standard

OPTIONS & ACCESSORIES

SPECIAL LENSES: Substitute VI for VA (standard) .125" nominal pattern 12 with 6.8 oz. average weight per square foot.

PLASTER FRAME: Catalog number: PF22.

CONTINUOUS ROW INSTALLATION: For F type fixtures, half-width flanges

are required between fixtures. Order Catalog Number: S2FC TRIM (each joint). RADIO INTERFERENCE FILTER 120 or 277 volt, 50 or 60 Hz. One per fixture is standard. SUFFIX: RF.

FUSING: Internal fast-blow fusing. SUFFIX: GLR. Internal slow-blow fusing. SUFFIX: GMF.

ELECTRICAL/WIRING OPTIONS: Consult factory.

DRYWALL KIT: Order Catalog Number: FK91X4. Request Folio OA30-10.

CHICAGO PLENUM: SUFFIX: CP.

MATERIALS: Chassis parts are die-formed code gauge cold rolled steel. Housing with side rails hemmed over and housing ends turned-in for safe handling.

FINISH: Chassis exterior—black baked polyester enamel. Cavity—white baked polyester enamel minimum 86% reflectance. Phosphate undercoating. LENSES: VA (standard) extruded virgin acrylic, 3/16" square based female cones, running 45° to the panel edge, .095" nominal thickness (similar to pat- tern 12). VI (optional) .125" nominal pattern 12 with 6.8 oz. average weight per square foot.

ELECTRICAL: Thermally protected class “P” ballast C.B.M. approved, non PCB. If K.O. is within 3" of ballast, use wire suitable for at least 90°.

LABELS: I.B.E.W./UL and C-UL.

SPECIFICATIONS

PERFORMANCE: In an installation of 2 lamp 31W luminaires in a room cavity ratio of 1, reflectance 80% ceiling, 50% wall, 20% floor, the C.U. shall not be less than .75. To prevent glare the VCP shall be not less than 40 either length- wise or crosswise (at 100fc level) and the average brightness at 65° shall not exceed 2629 candelas per square meter. To control veiling reflections, luminaire output in the 30°-90° zone shall not be less than 67.4%.

Job Information	Type:
Lightolier a Genlyte Thomas Company	www.lightolier.com

Technical Information: (978) 657-7600 • Fax (978) 658-0595

631 Airport Road, Fall River, MA 02720 • (508) 679-8131 • Fax (508) 674-4710 We reserve the right to change details of design, materials and finish.

© 2002 Genlyte Thomas Group LLC (Lightolier Division) A0902