Unisar 1.24.1867 manual Manual Pages

Manual Pages bdscan

--no-pack

Specifies that bdscan should not scan inside packed programs.

--no-recursive

Specifies that bdscan should not enter sub-directories for scanning. If you select this option only the first level directories will be scanned.

--recursive-level=level

Set the maximum recursive level to level. The default is 0, meaning no limitation.

--archive-level=level

Set the maximum archive depth level to level. The default is 12.

--ext[=ext1:ext2]

Specifies that bdscan should scan only the files with extensions specified in the list or in the configuration file, under the Extensions keyword.

--exclude-ext[=ext1:ext2]

Specifies that bdscan should exclude from scanning the files with extensions specified in the list. If the list is empty, the extensions from the configuration files are to be used.

--suspect-copy

Specifies that bdscan should copy the suspected files to quarantine.

--suspect-move

Specifies that bdscan should move the suspected files to quarantine.

--quarantine=path

Set the quarantine directory, where the infected files are stored when the action is quarantine. If the user can not write into the quarantine directory, bdscan will exit with error when quarantine action is invoked.

--conf-file=file

Set the alternate location of the configuration file. If this file is not valid, valid, bdscan will exit with an error message. By default, the configuration is read from

/e t c / B i t D e f e n d e r - s c a n n e r / b d s c a n . c o n f /usr/local/etc/bitdefender/bdscan.conf and ~/.BitDefender/bdscan.conf, the user file overrides partially or entirely the system-wide configuration.

92