10 | Using | BitDefender integration | |
BitDefender | |||
|
Once you have a working MailScanner installed on your server, open its configuration file /opt/MailScanner/etc/MailScanner.conf (for a default location) and find the next line.
Virus Scanners = none
Change it to the following form.
Virus Scanners = bitdefender
If you need to further customize the
10.2.3. Amavisd-new
Before real usage, it would be better to check BitDefender was properly detected. Therefore, run the next command and watch for the line saying bdscan has been found.
#
Somewhere in the output, you will see the next line.
Found primary av scanner BitDefender at /usr/bin/bdscan
This is all you have to do. You can now test the mail server integration using EICAR emails.
70