selection button. Press “Start/Pause/
Cancel” button.
AYou should use a lower spin speed for delicate laundries.
Temperature selection
Whenever a new programme is selected, the temperature anticipated for that programme appears on the temperature indicator (2b).
To change the temperature, press the temperature button (Figure
Cold selection is shown with
When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the programme you have selected will be displayed.
To decrease the temperature, press the “Temperature” button again.
| Normally soiled, white | |
| cottons and linens. (Ex.: | |
90˚C | coffee table covers, | |
| tablecloths, towels, bed | |
| sheets) | |
| Normally soiled, fade proof | |
| colored linens, cottons | |
| or synthetic clothes | |
60˚C | (Ex.: shirts, nightgowns, | |
| pajamas) and lightly soiled | |
| white linen clothes (Ex.: | |
| underwear) | |
40˚C | For delicate clothes (Ex.: veil | |
curtains), blended clothes | ||
30°C | ||
including synthetics and | ||
Cold | ||
woolens. | ||
|
Spin Speed selection
Whenever a new programme is selected, the maximum spin speed of the selected programme is displayed on the spin speed indicator (Figure
e
Rinse hold is shown with “
” and no
spin is shown with “ ” symbols. If you do not want to unload your clothes immediately after the programme, you may use the rinse hold function in order to prevent your clothes become wrinkled in an anhydrous condition. With this function, your laundry is kept in the final rinsing water. If you want to spin your laundry after the rinse hold function:
-Adjust the spin speed.
-Press Start/Pause/Cancel Button. Programme resumes. Your machines drains the water and spins your laundry.
You can use no spin function in order to drain the water without spinning at the end of the programme.
18
EN