![](/images/new-backgrounds/1315326/31532611x1.webp)
To use this tool properly, you must observe the safety regulations, the assembly instructions and the operating instruction to be found in this Manual. All persons who use and service the machine have to be acquainted with this manual and must be informed about its potential hazards. Children should be supervised at all times if they are in the area in which the tool is being used. It is also imperative that you observe the accident prevention regulations in force in your area. The same applies for general rules of occupational health and safety.
The manufacturer shall not be liable for any changes made to the tool nor for any damage resulting from such changes. Even when the tool is used as prescribed it is not possible to eliminate all residual risk factors. The following hazards may arise in connection with the tools construction and design:
Damage to the lungs if an effective dust mask is not worn. Damage to the hearing if effective ear protection is not worn.
Contents of carton
The GMC BJ110M biscuit joiner is supplied with the following accessories as standard
•Pin wrench
•Allen key
•Dust extraction adaptor
•Dust bag
•Kitbox
Unpacking
Due to modern mass production techniques, it is unlikely that your GMC Power Tool is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do so could result in serious personal injury.
6