Jet Tools JJ-8CS owner manual Levers and Controls, Specifications

Page 6

Levers and Controls

1.

Handwheel for Outfeed Table

8.

On/Off Switch

2.

Outfeed Table

9.

Rabbeting Ledge

3.

Fence

10.

Table Lock Knob

4.

Fence Adjustment Handle

11.

Fence Tilt Lock Handle

5.

Cutter Guard

12.

Fence Control Handle

6.

Infeed Table

13.

Belt Guard

7.

Handwheel for Infeed Table

14.

Dust Chute

Specifications:

JJ-8CS

Stock Number

708458K

Cutting Capacity

8” W x 1/2” D

Cutterhead Speed

5,500 RPM

Number of Knives

3

Rabbeting Capacity

1/2”

Table Surface

9” W x 66-1/2” L

Fence

4” W x 38-1/2” L

Blade Size

8” x 11/16” x 1/8”

Fence Tilts Right and Left

45o

Positive Stops

45o, 90o

Motor

2 HP, 1 Ph, 230V Only

Net Weight (approx.)

398 lbs.

Shipping Weight (approx.)

470 lbs.

The specifications in this manual are given as general information and are not binding. JET Equipment and Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts, fittings, and accessory equipment deemed necessary for any reason whatsoever.

6

Image 6
Contents JJ-8CS Woodworking Jointer Warranty & Service Volts Total Length of Cord in Feet AWGPage Table of Contents IntroductionSpecifications Levers and ControlsContents of Shipping Cartons Tools Required for AssemblyUnpacking and Cleanup Installing Bed to Stand Installing HandwheelsAssembling Knife-Setting Gauge Fence AdjustmentLeveling Outfeed Table with Cutterhead Knives Illustrates the outfeed table at the correct height Installing V-Belts Installing Cutterhead GuardDisconnect the machine from the power source, unplug If the access door latch needs adjustment Installing Access CoverInstalling Dust Chute Electrical ConnectionsOperation Bevel Cut Jointing Warped MaterialDirection of Grain Taper CutRabbet Cut Removing and Replacing KnivesGib Adjustment LubricationBlade Care Sharpening the Knives Cutterhead RemovalTrouble Possible Cause Solution Trouble-shootingFence Assembly Parts List for the JJ-8CS Woodworking Jointer Fence Assembly Index Part Description Size QtyBed Assembly 16 x 1-1/4 Stand and Motor Assembly JC-M01W Cutterhead Assembly Cutterhead Assembly Wiring Diagram