DeWalt 37-360 instruction manual Assembly, Assembling Dust Hood, Assembling Jointer Fence

ASSEMBLY

ASSEMBLING DUST HOOD

1.Assemble the dust hood (A) Fig. 8, to the outfeed end of the jointer base using the seven 5/8″ long button head screws (B) as shown.

MOVING START-STOP SWITCH TO THE UP POSITION

1.For shipping purposes, the start-stop switch and switch arm (A) is shipped in the down position, as shown in Fig. 9. Simply remove the two screws (B) Fig. 9, rotate switch and switch arm (A) 180 degrees, as shown in Fig. 10, and replace the two screws (B).

B

B

A

B

Fig. 8

B

A

A

B

Fig. 9

ASSEMBLING

JOINTER FENCE

1.Assemble the jointer fence assembly (A) Fig. 11, to the machine cabinet, as shown, using the two 1-1/8″long screws (B) and flat washers supplied.

Fig. 10

A

B B

Fig. 11

10