DeWalt 37-360 instruction manual Maintenance, Accessories

Page 23

MAINTENANCE

KEEP MACHINE CLEAN

Periodically blow out all air passages with dry compressed air. All plastic parts should be cleaned with a soft damp cloth. NEVER use solvents to clean plastic parts. They could possibly dissolve or otherwise damage the material.

Wear ANSI Z87.1 safety glasses while using compressed air.

FAILURE TO START

Should your machine fail to start, check to make sure the prongs on the cord plug are making good contact in the outlet. Also, check for blown fuses or open circuit breakers in the line.

LUBRICATION

Apply household floor paste wax to the machine table and extension table or other work surface weekly.

PROTECTING CAST IRON FROM RUST

To clean and protect cast iron tables from rust, you will need the following materials: 1 pushblock from a jointer, 1 sheet of medium Scotch-Brite™ Blending Hand Pad, 1 can of WD-40®, 1 can of degreaser, 1 can of TopCote® Aerosol. Apply the WD-40 and polish the table surface with the Scotch-Brite pad using the pushblock as a holddown. Degrease the table, then apply the TopCote® accordingly.

ACCESSORIES

A complete line of accessories is available from your Delta Supplier, Porter-Cable • Delta Factory Service Centers, and Delta Authorized Service Stations. Please visit our Web Site www.deltamachinery.com for a catalog or for the name of your nearest supplier.

Since accessories other than those offered by Delta have not been tested with this product, use of such accessories could be hazardous. For safest operation, only Delta recommended accessories should be used with this product.

PARTS, SERVICE OR WARRANTY ASSISTANCE

All Delta Machines and accessories are manufactured to high quality standards and are serviced by a network of Porter-Cable Delta Factory Service Centers and Delta Authorized Service Stations. To obtain additional information regarding your Delta quality product or to obtain parts, service, warranty assistance, or the location of the nearest service outlet, please call 1-800-223-7278 (In Canada call 1-800-463-3582).

Two Year Limited New Product Warranty

Delta will repair or replace, at its expense and at its option, any new Delta machine, machine part, or machine accessory which in normal use has proven to be defective in workmanship or material, provided that the customer returns the product prepaid to a Delta factory service center or authorized service station with proof of purchase of the product within two years and provides Delta with reasonable opportunity to verify the alleged defect by inspection. For all refurbished Delta product, the warranty period is 180 days. Delta may require that electric motors be returned prepaid to a motor manufacturer’s authorized station for inspection and repair or replacement. Delta will not be responsible for any asserted defect which has resulted from normal wear, misuse, abuse or repair or alteration made or specifically authorized by anyone other than an authorized Delta service facility or representative. Under no circumstances will Delta be liable for incidental or consequential damages resulting from defective products. This warranty is Delta’s sole warranty and sets forth the customer’s exclusive remedy, with respect to defective products; all other warranties, express or implied, whether of merchantability, fitness for purpose, or otherwise, are expressly disclaimed by Delta.

23

Image 23
Contents DJ-30 12 Jointer General Safety Rules Safety Guidelines DefinitionsFailure to Follow These Rules MAY Result in Serious Injury Failure to Follow These Rules MAY Result in Serious Injury Additional Safety Rules for JointersGrounding Instructions Power ConnectionsMotor Specifications Functional Description Three Phase OperationExtension Cords Definitions of Jointing and Planing Operations Removing Shipping Crate Unpacking and CleaningSelecting Floor Space Removing Machine from Shipping SkidAssembling Jointer Fence AssemblyAssembling Dust Hood Single Phase Installation Three Phase Installation Fence Operation START-STOP SwitchAdjusting Fence Positive Stops Infeed Table Adjustments Adjusting Belt Tension Outfeed Table AdjustmentsAdjusting Spring Tension of Cutterhead Guard Operation Placement of Hands During FeedingBeveling Jointing AN EdgePlaning or Surfacing Direction of Grain Taper CutsCutting a Rabbet Jointing or Planing Warped WoodREMOVING, Replacing and Setting Knives MaintenanceMO C Accessories MaintenanceCanadian PORTER-CABLE Delta Service Centers