Ryobi RT401W manual To Attach the Switch BOX, To Attach the Fences

ASSEMBLY

TO ATTACH THE SWITCH BOX

See Figure 3

3.Place the router table on its legs.

4.Use a #2 Phillips screwdriver to attach switch box (P) to the switch box bracket with 3 self tapping screws (U).

See Figure 5

6.Attach left fence assemblies to tabletop using 4 carriage bolts (R), 4 washers (V) and 4 knobs (L). Make sure that the turned down flange fits snug against inside wall of provided groove in tabletop. Use a hammer to tap carriage bolts (R) until seated to the bottom of the tabletop.

U (3)

V (4)

R (4)

P

L

V

U

Fig. 3

R

TO ATTACH THE FENCES

See Figure 4

5. Attach left fence (D) to left fence base (E) using 2 coun- tersink screws (S) and 2 wing nuts (W). Repeat for right fence (B) and right fence base (C).

S (4)

W (4)

W

D

W

E C B

S

S

Fig. 4 Fig. 5

10