Ryobi RT401W manual Securing the Router Table, To Attach Safety Shield, Assemble the Miter Guide

Page 11

ASSEMBLY

TO ATTACH SAFETY SHIELD

See Figure 6

7.Place the 2 holders (M) onto hinge of safety shield (A). Insert the safety shield with both holders on the 2 small holes on tabletop. Attach 2 holders securely to tabletop with 2 pan head screws (Q). Use a #3 Phillips screw- driver to keep from stripping the screw heads.

ASSEMBLE THE MITER GUIDE

See Figure 7

8.Place the miter guide head (H) on top of the miter bar

(J). Assemble miter guide by threading carriage bolt (R) through miter bar (J). Place washer (V) and knob (L) on end of carriage bolt and tighten the knob.

Q (2)

A

M

Q

R (1)

V (1)

L

V

H

J

R

Fig. 7

 

WARNING:

 

Before mounting the router make sure you have read

Fig. 6

and understood pages 9-11 of your owner’s manual.

 

SECURING THE ROUTER TABLE

WARNING:

DO NOT use the router table unless it is firmly mounted to a stable work surface. Failure to securely mount the router table could lead to serious personal injury and/or property damage.

See Figure 8

 

1. Secure router table to the work surface using wood

 

screws or sheet metal screws and washers (not pro-

Fig. 8

vided) through the holes.

 

11

Image 11
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRules for Safe Operation Unpacking and Checking Contents Router Table features include Features and SpecificationsPackage Contents and Hardware Legend Package Contents and Hardware Legend Description QTY Assembling the Router Table AssemblyTo Attach the Fences To Attach the Switch BOXAssemble the Miter Guide To Attach Safety ShieldSecuring the Router Table Or Y Mounting the RouterMounting Routers with Round Adapter Base Plate Hole patternMounting the Router Electrical Hookup Switch BOXIntroduction Circuit Breaker Switch Box FamiliarizationOperation of Switch Box and Router For Routers With LOCK-ON FeaturePencil line #1 Connecting a VacuumUsing your router/router table OperationLeft fence Right fence Knobs Straightedge Using the router for beadingUsing the router as a jointer Edge cuttingInside routing Adjusting the fence slidesRouting without safety shield, and/or fence Outside routing AccessoriesUsing miter guide Small workpiece Scrap piece Using featherboard flapsRouting small workpieces Repair Parts Hardware bag 119900102 Repair parts tabletop Key NoPage Service Model no