Makita 6940D instruction manual Additional Safety Rules for Charger Battery Cartridge

Page 6

ADDITIONAL SAFETY RULES FOR CHARGER &

BATTERY CARTRIDGE

1.Do not charge Battery Cartridge when temperature is BELOW 10°C (50°F) or ABOVE 40°C (104°F).

2.Do not attempt to use a step-up trans- former, an engine generator or DC power receptacle.

3.Do not allow anything to cover or clog the charger vents.

4.Always cover the battery terminals with the battery cover when the battery car- tridge is not used.

5.Do not short the battery cartridge:

(1)Do not touch the terminals with any conductive material.

(2)Avoid storing battery cartridge in a container with other metal objects such as nails, coins, etc.

(3)Do not expose battery cartridge to water or rain.

A battery short can cause a large current flow, overheating, possible burns and even a breakdown.

6.Do not store the tool and Battery Car- tridge in locations where the temperature may reach or exceed 50°C (122°F).

7.Do not incinerate the Battery Cartridge even if it is severely damaged or is com- pletely worn out. The battery cartridge can explode in a fire.

8.Be careful not to drop, shake or strike bat- tery.

9.Do not charge inside a box or container of any kind. The battery must be placed in a well ventilated area during charging.

SAVE THESE INSTRUCTIONS

6

Image 6
Contents Cordless Angle Impact Driver Specifications Electrical Safety Specific Safety Rules 100 150 Additional Safety Rules for Charger Battery Cartridge Installing or removing battery cartridge Functional DescriptionCharging Trickle charge Maintenance charge Reversing switch action AssemblySwitch action Electric brakeInstalling or removing driver bit or socket bit Adjusting the angle headStraight head and ratchet head optional accessory OperationMaintenance Recycling the BatteryAccessories Memo Memo Memo Makita U.S.A., Inc Mail this Portion Factory Service Centers Makita Limited ONE Year Warranty