| 002815 | Switch action | |
|
| ||
|
|
| CAUTION: |
|
| • | Before inserting the battery cartridge into the tool, |
|
|
| always check to see that the switch lever actuates |
|
|
| properly and returns to the “OFF” position when |
1 | 2 |
| released. |
1. Switch lever |
| • | After switching off, always move the release button |
2. Release button |
|
| backward to prevent the tool from being accidentally |
|
|
| switched on. |
To start the tool, move the release button forward and squeeze the switch lever. Tool speed is increased by increas- ing pressure on the switch lever. Release the switch lever to stop.
Electric brake
This tool is equipped with an electric brake. If the tool consis- tently fails to quickly stop after switch trigger release, have tool serviced at a Makita service center.
| 002821 |
1 | A |
| B |
1. Reversing switch
Reversing switch action
This tool has a reversing switch to change the direction of rotation. Slide the reversing switch to the A side (appear “F” marking) for clockwise rotation or to the B side (appear “R” marking) for counterclockwise rotation.
CAUTION:
•Always check the direction of rotation before operation.
•Use the reversing switch only after the tool comes to a complete stop. Changing the direction of rotation before the tool stops may damage the tool.
ASSEMBLY
CAUTION:
•Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool.
9