User-Maintenance
Instructions
Procedures not specifically explained in this manual must be performed only by a qualified technician.
To prevent serious injury
from accidental operation: Detach the air supply, safely discharge any residual air pressure in tool, and release throttle and/or turn switch to off position before performing any inspection, maintenance, or cleaning procedures.
To prevent serious injury from tool failure: Do not use damaged equipment. If abnormal noise, vibration, or leaking air occurs, have problem corrected before further use.
Cleaning, Maintenance, and
Lubrication
more safely and will also reduce wear on the tool.
2.Quarterly (every 3 months) - Tool Disassembly, Cleaning, and In- spection: Have the internal mecha- nism cleaned, inspected, and lubri- cated by a qualified technician. If the vanes need replacement, all vanes should be replaced as a set.
Note: These procedures are in addition to the regular checks and maintenance explained as part of the regular op- eration of the
1.Daily - Air Supply Maintenance: Every day, perform maintenance on the air supply according to the com- ponent manufacturers’ instructions. The lubricator’s oil level needs to be maintained and the moisture filter must be regularly drained. Perform- ing routine maintenance on the air supply will allow the tool to operate
SKU 65159 60 61 For technical questions, please call | Page 10 |