desired orientation. Set to Forward by turning counterclockwise; Reverse by turning clockwise.
For 65161 3/8” Air Ratchet, turn Forward/Reverse Lever (42) to the desired orientation. Set to Forward by turning counterclockwise; Reverse by turning clockwise.
3.To adjust air pressure from Low to High, use a
For 65159 1/4” Air Ratchet, turn the Air Regulator (6) to the desired Low/ High Setting.
For 65160 1/2” Air Ratchet, turn the Air Regulator (9) to the desired Low/ High Setting.
For 65161 3/8” Air Ratchet, turn the Air Regulator (7) to the desired Low/ High Setting.
4.Place the drive socket over the nut to be tightened or loosened.
For 65159 1/4” Air Ratchet, push the Trigger (48) down to activate tool.
For 65160 1/2” Air Ratchet, push the Trigger (14) down to activate tool.
For 65161 3/8” Air Ratchet, push the Trigger (4) down to activate tool.
5.When job is done, release Trigger.
6.If the tool requires more force to accomplish the task, verify that the tool receives sufficient, unobstructed airflow (CFM) and increase the pressure (PSI) output of the regulator up to the maximum air pressure rating of this tool.
7.CAUTION! To prevent tool and accessory failure, resulting in injury:
Do not exceed the tool’s maximum air pressure rating. If tool still does not have sufficient force at maximum pressure and sufficient airflow, then a larger tool may be required.
8.To prevent accidents, detach air sup- ply, safely discharge any residual air pressure in tool, and release throttle and/or turn switch to off position after use. Clean external surfaces of tool with clean, dry cloth, and apply a thin coat of tool oil. Then store tool in- doors out of children’s reach.
SKU 65159 60 61 For technical questions, please call | Page 9 |