Specifications
| Overall dimensions: | |
|
| |
| Activation method: Trigger squeeze design. | |
|
| |
AIR HAMMER: | Net weight: 3.35 lb | |
| ||
Air inlet: 1/4” - 18 NPT | ||
| ||
|
| |
| Air Consumption: 4 CFM | |
|
| |
| Maximum Operating Pressure: 90 PSI | |
|
| |
| Types: 1 - Ripping Chisel | |
| 1 - Cold Chisel | |
| 1 - Punch Chisel | |
| 1 - Panel cutter Chisel | |
CHISELS: | Dimensions: | |
| Shanks: 0.395” ~ 397” | |
| Bore: 0.401” | |
| Lengths: | |
| Net weights: 3.10 ~ 3.25 oz. | |
|
| |
| Overall dimensions: 9” L X | |
SCALER: | Needle quantity: 19 | |
| ||
Needle dimensions: | ||
| ||
|
| |
| Net weight: 2.05 lb. | |
|
|
Save This Manual
You will need this manual for the safety warnings and precautions, assembly, oper- ating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover. Write the product’s serial number in the back of the manual near the assembly diagram, or write month and year of purchase if product has no serial number. Keep this manual and invoice in a safe and dry place for future reference.
GENERAL SAFETY RULES
WARNING!
READ AND UNDERSTAND ALL INSTRUCTIONS
Failure to follow all instructions listed below may result in
serious injury.
SAVE THESE INSTRUCTIONS
1.Use compressed air only: Clean, dry, regulated compressed air at no more than 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 95801 | For technical questions, please call | Page |