16.Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. Do not force the tool and do not use the tool for a purpose for which it is not intended.
17.Do not use the Air Hammer if the Power Switch does not turn it on or off. Any tool that cannot be controlled with the Power Switch is dangerous and must be replaced.
18.Disconnect the air supply before making any adjustments, changing acces- sories, or storing the tool. Such preventive safety measures reduce the risk of starting the tool accidentally. Always unplug the tool from its air supply before performing any inspection, maintenance, or cleaning procedures.
19.Store idle tools out of reach of children and other untrained persons. Tools are dangerous in the hands of untrained users. Never allow Children to come in contact with this product.
20.Maintain tools with care. Keep cutting tools sharp and clean. Properly main- tained tools with a sharp cutting edge are less likely to bind and are easier to control. Do not use a damaged tool. Tag damaged tools “Do not use” until repaired.
21.Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect the tool’s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly maintained tools.
Service
1.Tool service must be performed only by qualified repair personnel. Service or maintenance performed by unqualified personnel could result in a risk of injury.
2.When servicing a tool, use only identical replacement parts. Follow instruc- tions in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of unauthorized parts or failure to follow maintenance instructions may create a risk of injury.
SPECIFIC SAFETY RULES
1.Maintain labels and nameplates on the Air Hammer. These carry important infor- mation. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2.Maintain a safe working environment. Make sure there is adequate surrounding workspace. Do not use this product in a damp or wet location.
3.When using this Air Hammer, always maintain a firm grip on the tool with both hands to resist starting torque.
4.Avoid unintentional starting. Make sure you are prepared to begin work before turning on the air supply or the Air Hammer switch.
SKU 95801 | For technical questions, please call | Page |