Assembly Instructions
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram on page 8 of this manual.
WARNING! Make sure the Power Switch of the tool is in its “OFF” position and that the tool is unplugged from its air supply before making any adjustments to the tool.
USE AS AIR HAMMER/CHISEL
1.Insert the Chisel (17) you wish to use through the Spring (16) and into the front of the Cylinder (13). Twist the Spring (16) onto the threaded front of the Cylinder (13).
NOTE: When twisting on, exert pressure on the hook at the front of the Spring (16). When twisting off, exert pressure on the hook at the back. Doing so allows for easy on, easy off application. See Figures 2 & 3
13 | 16 | Figure 2 | |
| |||
|
|
| 17 |
|
|
| |
2.Insert Cylinder (13) over the Plunger (14) and the Valve (15) and carefully twist the Cylinder (13) into the Air Housing (1).
Figure 3
1
13 14
15
Front Hook 16 Rear Hook 17
SKU 95801 | For technical questions, please call | Page |