AMD GA-7VASFS-FS user manual BAT Battery, Faudio Faudio Connector

English

12) BAT (Battery)

FS

If you want to erase CMOS...

1.Turn OFF the computer and unplug the power cord. 2.Remove the battery, wait for 30 second. 3.Re-install the battery.

4.Plug the power cord and turn ON the computer.

+

CAUTION

™Danger of explosion if battery is incorrectly replaced.

™Replace only with the same or equivalent type recommended by the manufacturer.

™Dispose of used batteries according to the manufacturer's instructions.

13) F_AUDIO (F_AUDIO Connector)

If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header. To find out if the chassis you are buying support front audio connector, please contact your dealer.Please note, you can have the alternative of using front audio connector or of using rear audio connector to play sound.

		Pin No.	Definition
10	9	1	MIC
		2	GND
		3	REF
2	1	4	POWER
		5	FrontAudio (R)
		6	RearAudio (R)
		7	Reserved
		8	No Pin
		9	FrontAudio (L)
		10	RearAudio (L)

FS

GA-7VASFS-FS Motherboard - 26 -