AMD GA-7VASFS-FS First / Second / Third Boot Device, Password Check, Full Screen Logo Show

Page 38

English

First / Second / Third Boot Device

Floppy

Select your boot device priority by Floppy.

LS120

Select your boot device priority by LS120.

HDD-0~3

Select your boot device priority by HDD-0~3.

SCSI

Select your boot device priority by SCSI.

CDROM

Select your boot device priority by CDROM.

ZIP

Select your boot device priority by ZIP.

USB-FDD

Select your boot device priority by USB-FDD.

USB-ZIP

Select your boot device priority by USB-ZIP.

USB-CDROM

Select your boot device priority by USB-CDROM.

USB-HDD

Select your boot device priority by USB-HDD.

LAN

Select your boot device priority by LAN.

Disabled

Select your boot device priority by Disabled.

Password Check

System

The system will not boot and will not access to Setup page if the correct

 

password is not entered at the prompt.

Setup

The system will boot but will not access to Setup page if the correct password

 

is not entered at the prompt. (Default value)

Full Screen LOGO Show

This feature allows you to show the company logo on the bootup screen.

Disabled

Shows the POST messages at boot.

Enabled

Shows the still image(LOGO) on the full screen at boot. (Default value)

GA-7VASFS-FS Motherboard

- 38 -

Page 37 Page 39
Image 38
Page 37 Page 39
Contents GA-7VASFS-FS Table of Content Table of Content Installing the motherboard to the chassis… Introduction Bios GA-7VASFS-FS Motherboard Layout Block Diagram English Hardware Installation Process StepInstall the Central Processing Unit CPU CPU Installation CPU Heat Sink Installation Install memory modules DDR Introduction Install expansion cards ZParallel Port, Serial Port and Spdif Port LPT/COMA/SPDIF PS/2 Keyboard and PS/2 Mouse ConnectorYieee 1394 and USB Connector USB & LAN Connector \ Audio ConnectorsFUSB1/FUSB2 12 BATAuxin 16 F1394ATX12V +12V Power Connector ATX ATX PowerCpufan CPU FAN Connector Sysfan System FAN ConnectorPwrfan Power Fan Connector IDE1/ IDE2 IDE1/IDE2 ConnectorFDD Floppy Connector SATA0/SATA1 Serial ATA ConnectorMPD+ Fpanel 2x10 pins connector BAT Battery Faudio Faudio ConnectorAuxin AUX In Connector USB1 / FUSB2 Front USB Connector, Yellow16 F1394 Ieee 1394 Connector Sirq Serial IRQ ConnectorCI Case Open Clrcmos Clear Cmos jumperEnglish Bios Setup Advanced Bios Features Status Page Setup Menu / Option Page Setup MenuStandard Cmos Features Main MenuLoad Fail-Safe Defaults Power Management SetupPnP/PCI Configurations Load Optimized DefaultsTime Standard Cmos FeaturesDate DriveA / Drive B IDE Primary Master, Slave / IDE Secondary Master, SlaveAcoustic Management Memory Floppy 3 Mode Support for JapanAreaHalt on ExtendedMemory Advanced Bios FeaturesBase Memory Full Screen Logo Show First / Second / Third Boot DevicePassword Check OnChip IDE Channel1 Integrated PeripheralsOnChip IDE Channel0 MC97Modem OnChip SerialATAAC97Audio USB 1.1 ControllerOnboard H/W LAN Parallel Port ModeUSB Mouse Support Onboard H/WUSB Device Wake-up From S3 Power Management SetupAcpi Suspend Type Soft-Off by PwrbtnResume by Alarm Keyboard Power OnMouse Power On AC Back FunctionPnP/PCI Configurations PC Health Status Current System/CPU TemperatureCurrent CPU/SYSTEM/POWER FAN Speed RPM Current Voltage V Vcore / +3.3V / +5V / +12V /5VSBFrequency/Voltage Control Dram Clock MHzLoad Fail-Safe Defaults Load Fail-Safe Defaults? Y/N?YLoad Optimized Defaults Set Supervisor/User Password Enter PasswordSave & Exit Setup Save to Cmos and Exit Y/N? YExit Without Saving Quit Without Saving ? NEnglish
Top Page Image Contents