Safety advice
drugs, alcohol or medication. One moment of carelessness when using the device can lead to serious injury.
DANGER OF BURNS! Never touch the hot soldering tip or the molten solder. You could suffer burn injuries.
Always let the device cool before you replace components on the device, clean it or check its condition.
After use let the soldering pencil cool down in air only. Under no circumstances quench the tip in water!
CAUTION! DANGER OF FIRE! Place the soldering pencil down only in the special multifunctional holder or on a
Place the soldering pencil in the multifunctional holder during pauses in your work.
Keep the device away from combustible material. Never leave the device switched on and unattended. CAUTION! DANGER OF INJURY! Keep your hands away from the hot workpiece. The heat from soldering can be conducted through the workpiece. For this reason you should use the third hand to hold small workpieces.
Avoid placing the hot soldering tip in contact with the plastic parts of the multifunctional holder. Failure to observe this advice may result in damage to the device.
If a dangerous situation arises, pull the mains plug immediately out of the mains socket.
CAUTION! DANGER OF POISONING! Do not breathe air contaminated with soldering fumes.
When working with the device for long periods do not allow the fumes from soldering to build up. They may be hazardous to health. Always provide adequate
ventilation of your working area. In addition, it is recommended that you wear protective gloves, a face mask and a protective apron.
GB/IE
11