OPERATION
TO INSTALL BATTERY PACK
See Figure 6.
nLock the switch.
nPlace the battery pack in the tool. Align raised rib on battery pack with the groove inside the tool.
nMake sure the latches on each side of the battery pack snap in place and battery pack is secured in the tool before beginning operation.
CAUTION:
When placing battery pack in the tool, be sure raised rib on battery pack aligns with the bottom of the tool and latches into place properly. Improper installation of the battery pack can cause damage to internal components.
TO REMOVE BATTERY PACK
See Figure 7.
nLock the switch trigger on the tool by placing the switch trigger in center position.
nLocate latches on side of battery pack and depress to release battery pack from the tool.
nThe battery pack will automatically disconnect in direction to be removed when buttons are depressed.
nRemove the battery pack from the tool.
LATCH
BATTERY
PACK
Fig. 6
LATCH |
|
DEPRESS LATCHES TO |
|
RELEASE BATTERY PACK | Fig. 7 |
| |
|
|
13