ASSEMBLY
UNPACKING
This product has been shipped completely assembled.
nCarefully remove the tool and any accessories from the box.
nMake sure that all items listed in the packing list are included.
nInspect the tool carefully to make sure no breakage or damage occurred during shipping.
nDo not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
nIf any parts are damaged or missing, please call
PACKING LIST
18V Hand Planer
Blades (2)
Edge Guide/Rabbet Guide
Blade Wrench
Dust Bag
Battery Pack
Charger
Carrying Case
Operator's Manual
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury.
WARNING:
To prevent accidental starting that could cause serious personal injury, always remove the battery pack from the tool when assembling parts.
INSTALLING/REMOVING THE DUST BAG
See Figure 2.
The dust bag located on the right side of the hand planer provides a dust collection system. Wood particles are drawn up through the base and collect in the dust bag during op- eration. For more efficient operation, empty the dust bag when half full.
To install, slide the dust bag adaptor onto the dust port on the planer. To remove the dust bag, grasp the adaptor and pull the dust bag away from the planer.
CHIP EXHAUST
DUST BAG | Fig. 2 |
ATTACHING THE PLANER TO A VACUUM
See Figure 3.
The chip collection system of the hand planer has a
nRemove the dust bag.
nAttach a vacuum hose to the chip exhaust.
nConnect the vacuum to a power supply.
WARNING:
When the tool is not connected to vacuum, always reinstall the dust bag back onto the tool. Failure to do so could cause dust or foreign objects to be thrown into your face or eyes, which could result in possible serious injury.
CHIP EXHAUST
VACUUM HOSE
10
Fig. 3