Powermatic WP2510 operating instructions Replacement Parts

Trouble

Machine will not start/restart or repeatedly trips circuit breaker or blows fuses.

Planer does not come up to speed.

Probable Cause	Remedy
Motor starter failure.	Examine motor starter for burned or
	failed components. If damage is
	found, replace motor starter. If motor
	starter looks okay but is still suspect,
	you have two options: have a
	qualified electrician test the motor
	starter for function, or purchase a new
	starter and establish if that was the
	problem on changeout.
	If you have access to a voltmeter, you
	can separate a starter failure from a
	motor failure by first, verifying
	incoming voltage at 220+/-20 and
	second, checking the voltage
	between starter and motor at 220+/-
	20.
	If incoming voltage is incorrect, you
	have a power supply problem.
	If voltage between starter and motor
	is incorrect, you have a starter
	problem.
	If voltage between starter and motor
	is correct, you have a motor problem.
Motor failure.	If electric motor is suspect, you have
	two options: Have a qualified
	electrican test the motor for function
	or remove the motor and take it to a
	quality electrical motor repair shop
	and have it tested.
Miswiring of the machine.	Double check to confirm all electrical
	connections are correct. Refer to
	appropriate wiring diagrams on pages
	54 and 55 to make any needed
	corrections.
Switch failure.	If a start, stop, or table movement
	switch is suspect, you have two
	options: Have a qualified electrical
	test the switch for function, or
	purchase a new switch and establish
	it that was the problem on changeout.
Low current.	Contact a qualified electrician.

Replacement Parts

Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-274-6848 Monday through Friday (see our website for business hours: www.powermatic.com). Having the Model Number and Serial Number of your machine available when you call will allow us to serve you quickly and accurately.

38