Grizzly G1037 instruction manual Chip Chute

Page 17

Figure 15.

Figure 16.

Chip Chute

A chip chute is included for convenient connec- tion to a dust collector.

The dust collector chip chute mounts to the knife cover. It has a fitting for attaching a 4" dust col- lection hose.

To mount the dust collector chip chute:

1.Unplug the Planer/Moulder and turn if OFF.

2.Using the hardware provided, mount the dust collector chip chute.

3.Be sure to turn the dust collector on before operating the Planer/Moulder.

Figure 17.

 

 

 

 

 

 

 

 

 

 

 

 

G1037 Planer / Moulder

-15-

Image 17
Contents Planer Moulder Page Table of Contents Safety Instructions For Power Tools SafetyAdditional Safety Instructions For Planer-Moulders 110V Operation 220V Operation Circuit RequirementsGrounding General Information Unpacking Piece Inventory Clean up Site Considerations Stand Assembly AssemblyMounting to stand Mounting To StandKnife Removal AdjustmentsKnife Setting Bedboard Moulding Knives Chip Chute Chip Deflector Feed Speed Setup for 24 F.P.M G1037 Planer / MoulderStock Pre-sizing Adjusting Scale Belt Tension Test Run Thickness Planing OperationsPlaning For Finish GeneralLubrication MaintenanceClosure Machine Data G1037 Planer / Moulder Gear BOX G1037 Planer / Moulder Base Mechanism G1037 Planer / Moulder Upper Frame Upper PLATE, R & L Troubleshooting Troubleshooting Warranty and Returns