Makita 2040 instruction manual

Page 11

the column.

Fig. 11

Adjusting infeed/outfeed rollers

The infeed/outfeed rollers are factory adjusted. If the rollers require adjustment, please follow this procedure :

Place a straight and.lever piece of wood on the outfeed table top. Turn the crank handle to raise the table and to bring the piece of wood into contact with the main frame. Then turn the crank handle a half-turn counterclockwise to lower the table slightly. Insert the piece of wood so that it reaches under the outfeed roller. Adjust the right and left heighi adjusting screws so that the outfeed roller contacts the piece of wood evenly.

Adjust the infeed roller in the same manner as the outfeed roller.

I

NOTE:

Turning the height adjustingscrew one turn clockwise lowers the roller 3 mm (1/8").

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Planer General Safety Precautions AWG Grounding Methods Additional Safety Rules Depth of cut Maximum depth of cut with a piece Return rollers Cutter knife Cutter Knife Installation Height Adjustment Above adjustment procedure should be Page Maintenance Page Accessor IES Page Model Jan -08-96 Us Page Hex EDDESCRlPTlDN Makita Corporation
Top Page Image Contents