To install the blades, first clean out all chips | I |
or foreign matter adhering to the drum or | Drum cover 1 lnstalationbolts |
blades. Insert the blade between the drum | |
cover from the side opposite the belt so |
|
that the blade end will protrude slightly | Planer blade |
from the side of the drum. Tighten the two |
|
installation bolts securely with the hex |
|
wrench provided. |
|
| Side of drum |
| Drum |
CAUTION:
Use only the Makita hex wrench providedto remove or install the blades. Failure to do so may result in overtightening or insufficient tightening of the installation bolts. This could cause an injury.
Hex wrench storage
When not in use, the hex wrench can be convenientlystored.
15