ASSEMBLY
Dust bag
Installthe dust bag on the nozzle of the tool. When installing it, push the bag's entry port toward the nozzle as far as it will go to prevent it from coming off during operation.
For the best results, empty the dust bag when it becomes about half full. Remove the dust bag from the tool and pull out the fastener.
NOTE:
If you connect a Makita vacuum cleaner Model 406 to this tool, more efficient and cleaner operations can be performed.
Removingor installing planer blades
CAUTION:
*Always be sure that the tool is switched off and the battety cartridge is removed before removing or installing the blades.
*Handle the blades very carefully. Use gloves or rags to protect your fingers or hands when removing or installing the blades.
To remove the blades, first loosen the two installation bolts one turn counterclockwise with the hex wrench provide.
Push the blade from the belt side with the hex wrench. Remove the other blade in the same manner.
14