Bosch Power Tools 53514 manual Accessories

! WARNING

BM 2610917139 6/02 7/10/02 10:50 AM Page 13

Accessories

If an extension cord is necessary, a cord with adequate size conductors that is capable

of carrying the current necessary for your tool must be used. This will prevent excessive voltage drop, loss of power or overheating. Grounded tools must use 3- wire extension cords that have 3-prong plugs and receptacles.

NOTE: The smaller the gauge number, the heavier the cord.

RECOMMENDED SIZES OF EXTENSION CORDS

120 VOLT ALTERNATING CURRENT TOOLS

					Wire Sizes in mm2
	Cord Size in A.W.G.
Tool’s
Ampere
Rating	Cord Length in Feet				Cord Length in Meters
	25	50	100	150	15	30	60	120
3-6
	18	16	16	14	.75	.75	1.5	2.5
6-8	18	16	14	12	.75	1.0	2.5	4.0
8-10	18	16	14	12	.75	1.0	2.5	4.0
10-12	16	16	14	12	1.0	2.5	4.0	—
12-16	14	12	—	—	—	—	—	—

* Standard parallel width guide fence	** Vacuum hose
** Deluxe angle fence	** Chip bag
** Rabbeting depth stop	(*= standard equipment)
* Blade wrench 2.5mm
* Carbide reversible blades (2)	(**= optional accessories)
* Vacuum connector

-13-