Envision Peripherals IM1603 Unit Start Up, Maintenance Filters, Blower Motors, Air Coil

Page 18

ENVISION SERIES AIR HANDLER INSTALLATION MANUAL

Unit Start Up

•Check that supply voltage matches nameplate data.

•Fuses, breakers and wire size are correct.

•Low voltage wiring is complete.

•Piping is complete and water system is cleaned and flushed.

•Air is purged from the closed loop system.

•Isolation valves are open, water control valves or pumps are wired.

•Condensate line is open and correctly pitched.

•Transformer switched to 208v if applicable.

•DIP switches are set correctly.

•Blower rotates freely.

•Blower speed is correct.

•Air filter/cleaner is clean and in position.

•Service/access panels are in place.

•Return air temperature is between 50-80°F heating and 60-95° cooling.

•Check air coil cleanliness to insure optimum performance. Clean as needed according to maintenance guidelines. To obtain maximum performance the air coil should be cleaned before startup. A 10 percent solution of dishwasher detergent and water is recommended for both sides of coil. A thorough water rinse should follow.

Maintenance Filters

Filters must be clean to obtain maximum performance. They should be inspected monthly under normal operating conditions and be replaced when necessary. Units should never be operated without a filter. Always replace the filter with the same type as originally furnished.

Condensate Drain

In areas where airborne bacteria produce slime in the drain pan, it may be necessary to treat chemically to minimize the problem. The condensate drain can pick up lint and dirt, especially with dirty filters.

Blower Motors

The ECM motor is equipped with sealed ball bearings and requires no periodic lubrication.

Air Coil

The air coil must be cleaned to obtain maximum perfor- mance. Check once a year under normal operating condi- tions and, if dirty, brush or vacuum clean. Care must be taken not to damage the aluminum fins while cleaning.

Caution: Fin edges are sharp.

17

Page 17 Page 19
Image 18
Page 17 Page 19
Contents Envision Series Air Handler Installation Manual WaterFurnace Table of Contents Nomenclature Initial InspectionGeneral Installation Information Safety ConsiderationsMoving and Storage Unit LocationDuct System Air Handler Configuration Condensate DrainBottomflow Application Connection to the Coil Air Handler InstallationLeak Testing System EvacuationCharging the System TXV Superheat AdjustmentsRefrigeration Refrigerant Line SizingDecrease Superheat Open Valve Increase Superheat Close Valve Hydronic Models =/2CCoil Capacity vs. Entering Water Temperature Electrical DataWater Presure Drop Hydronic Coil Low Voltage Point to Point Wiring 208v 240vWiring Schematic 208-230/60/1`6O\RZS`e YE3ZSQb`WQ6SOb Cooling/Heating settings Dehumidification Mode settingsECM Blower Control Dip Switch Settings Blower PerformanceBlower Motors Maintenance FiltersUnit Start Up Air CoilDimensional Data Top Flow/Horizontal Unit ConfigurationBottom Flow Unit Configuration =D73E @=BD73E @756BA723D73E =BB=D73EReplacement Procedures Warranty Material ReturnObtaining Parts Product

IM1603 specifications

Envision Peripherals IM1603 is a state-of-the-art display solution designed to cater to the diverse needs of various sectors, including retail, corporate, and education. This innovative device combines advanced technology with user-friendly features, making it a robust choice for organizations looking to enhance their visual communication strategies.

One of the standout features of the IM1603 is its high-definition display, which boasts impressive resolution and vivid color accuracy. With its 16:9 aspect ratio, the screen offers a cinematic viewing experience, making it perfect for sharing presentations, videos, and graphics in high clarity. The touchscreen functionality adds to its versatility, allowing users to interact directly with the display. This is particularly beneficial in educational environments where interactive learning tools are essential.

The IM1603 is built with durability in mind. It features a rugged design that can withstand the rigors of daily use, ensuring that it remains functional in busy settings. This reliability is complemented by the enhanced brightness levels, which ensure that the content is easily viewable even in well-lit environments. The anti-glare surface minimizes reflections, making it user-friendly for both presenters and viewers.

Connectivity is another strong point of the Envision Peripherals IM1603. It comes equipped with multiple input options, including HDMI, VGA, and USB ports, enabling seamless integration with various devices such as laptops, media players, and cameras. This flexibility ensures that users can easily switch between different sources without the need for complicated setups.

Moreover, the IM1603 incorporates advanced LED technology, which not only improves energy efficiency but also extends the lifespan of the display. This means that organizations can enjoy long-term use without the frequent need for replacements, making it a cost-effective solution.

In terms of installation, the IM1603 offers several mounting options, including wall mounts and stands, providing flexibility to fit different setups. This adaptability makes it suitable for a wide range of applications, from digital signage in retail spaces to interactive presentations in corporate environments.

In conclusion, the Envision Peripherals IM1603 stands out as a premier display solution that combines exceptional visual quality, durability, and connectivity. Its advanced features cater to the needs of various industries, making it an ideal choice for those seeking to elevate their display capabilities. With the IM1603, organizations can engage their audiences more effectively and create impactful visual experiences.
Top Page Image Contents