Makita HM1214C dimensions Specification, Standard equipment, Optional accessories

TECHNICAL INFORMATION

PRODUCT

Model No.	HM1214C
Description	Demolition Hammer

CONCEPT AND MAIN APPLICATIONS

Model HM1214C is a 10kg-class demolition hammer adapted for SDS-MAX bits.

The main features are as follows:

AVT (Active dynamic vibration absorber)

for reduced vibration during chipping Suppression of motor speed during no-load

for reduced vibration when idling

In-line tool design optimum for downward vertical applications High work efficiency

Specification

P 1/ 20

Dimensions: mm (")

Length (L)	700 (27-1/2)
Width (W)	129 (5-1/8)
Height (H)	265 (10-3/8)

	Voltage (V)			Current (A)		Cycle (Hz)				Continuous Rating (W)		Max. Output (W)
										Input	Output
	110			15			50/60			1,510	700	1,600
	120			14			50/60			---	700	1,600
	220			7.8			50/60			1,510	750	1,800
	230			7.8			50/60			1,510	750	1,800
	240			7.8			50/60			1,510	750	1,800
	Impacts per min: min-1=ipm								950 - 1,900
	Shank type								Adapted for SDS-MAX bits
	Shank diameter: mm (")								18 (11/16)
	Vibration	AVT (Active dynamic								Yes
			vibration absorber)
	absorption
		Vibration absorbing handle								No
		Variable speed control by dial								Yes
	Electronic	Soft start								Yes
	control	Constant speed control								Yes
		Suppression of motor speed								Yes
		during no-load
	Double insulation									Yes
								Europe, Korea, Cyprus: 4.0 (13.1)
	Power supply cord: m (ft)									Brazil: 2.0 (6.6)
									Other countries: 5.0 (16.4)
	Net weight: kg (lbs)								11.7 (25.8)
	Weight according to								12.3 (27.1)
	EPTA-Procedure 01/2003: kg (lbs)
Standard equipment
	Side handle (D-shaped)				1		Plastic carrying				1
	Bit grease	..................................			1		Cleaning cloth				1
	Bull point	..................................			1

Note: The standard equipment for the tool shown above may vary by country.

Optional accessories

Bull points	Grooving chisel	Grease vessel (containing 30g hammer grease)
Cold chisels	Clay spade	Plastic carrying case
Scaling chisels	Bushing tool	Safety goggles
Scaling chisel (for Tile)	Rammer	Hammer service kit